DIY plumbing Tips and Tricks

How to Diagnose Common Plumbing Issues Yourself

May 9, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Plumbing issues in your home can range from minor inconveniences to major headaches, disrupting your day-to-day life. Early detection and diagnosis are key to minimizing damage and stress.

Diagnose Common Plumbing Issues

Understanding how to spot and diagnose common plumbing issues allows you to decide whether it’s a quick fix or time to call the professionals. Here’s a guide to help you identify and diagnose four common plumbing issues: leaky faucets, running toilets, clogged drains, and low water pressure.

Diagnosis Leaky Faucets

Symptoms:

Dripping or trickling sound
Water pooling around the base of the faucet
Increased water bills

Diagnosis:

Leaky faucets are often the result of worn-out washers or O-rings, the small disks that seal the connection between the faucet and the pipe. Over time, these parts can deteriorate or become loose, allowing a small but persistent water flow to escape.

How to Check:

Turn off the faucet’s water supply. Disassemble the faucet handles to access the washers or O-rings inside. Check these parts for signs of wear or damage.

Diagnosis Running Toilets

Symptoms:

Constant running water sound in the toilet
Frequent toilet tank refills when not in use
Unusually high water bills

Diagnosis:

A running toilet is often caused by a flapper issue or a problem with the fill valve. The flapper is a rubber seal that stops the water in the tank from entering the bowl. If it’s not sealing correctly, water will continuously leak into your bowl, causing the tank to refill repeatedly.

How to Check:

Look at the flapper and inspect it for signs of wear or warping. If it looks damaged, replace it. Also, check the fill valve’s adjustment mechanism to ensure it stops the incoming water at the correct level in the tank.

Diagnosis Clogged Drain

Symptoms:

Water back up from the sink drain
Slow drainage in the sink or bathtub
Gurgling sounds coming from the drains

Diagnosis:

Clogged drains are usually the result of debris buildup, like hair, grease, or soap scum, which obstructs water flow. In kitchens, grease and food particles are common culprits, while bathroom sinks and showers often accumulate hair and soap scum.

How to Check:

Begin by physically examining the drain. Remove any visible obstruction with gloves or a drain snake. A plunger or a chemical drain cleaner (used with caution) may be effective for deeper clogs.

Diagnosis Low Water Pressure

Symptoms:

When you are experiencing weak water flow from faucets or shower heads
Difficulty operating multiple water sources simultaneously
Changes in water pressure at different times of day

Diagnosis:

Low water pressure can stem from clogged aerators, corroded plumbing, or a municipal water supply problem.

How to Check:

First, clean the faucet’s aerator – the screen at the end of the faucet – by unscrewing it and removing any debris. If this doesn’t improve the pressure, the issue might be more complex, such as a leak or blockage in your home’s main pipes.

When to Call a Professional

While some plumbing issues may be remedied by using the DIY approach, others require the expertise of a professional plumber. If you’re unsure of the diagnosis, if the problem persists after your initial fix, or if the issue is with your main water line or sewer line, it’s time to call in an expert. Attempting complex repairs alone can lead to further damage and costly repairs.

Remember, early diagnosis and appropriate action may save you from experiencing the inconvenience and expense of major plumbing disasters. Stay vigilant, perform regular checks on your plumbing system, and don’t hesitate to seek professional help when needed.

Tankless Water Heaters vs. Storage Tank Water Heaters

April 29, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks, Water Heaters/by raleigh plumbers

The Battle of the Boilers: Tankless Water Heaters vs. Traditional Water Heaters

Tankless Water Heaters vs. Storage Tank Water Heaters — As the spring season arrives and the earth awakens from its winter slumber, many homeowners are gearing up for a season of renovation and repair; high on this list is the ever-important decision of how to upgrade or replace their water heaters. With technologies evolving rapidly, the choice between traditional and tankless water heaters has become increasingly pivotal. At their core, both systems aim to provide your home with a reliable hot water supply. Still, their operational differences and long-term benefits spotlight the diverging roads of water heating. This guide illuminates the intricacies of tankless and traditional water heaters, helping you make an informed decision tailored to your home’s needs.

The Tank Tradition

Traditional water heaters are the household stalwarts we’ve grown accustomed to, operating through a relatively simple process. A large tank, usually holding 40 to 60 gallons of water, is heated by gas or electricity. The heated water is then stored until needed, ensuring your home has a constant hot water supply for bathing, washing dishes, and laundry. The chief advantages of traditional water heaters lie in their lower upfront cost and the familiarity homeowners have with their operation, having used similar models in the past.

However, the conveniences of the traditional model come with a few caveats. First, the “standby heat loss” – a process where heat escapes through the tank walls even when there is no hot water demand – increases energy consumption. Secondly, the finite storage capacity may lead to “cold showers” when multiple users deplete the tank’s supply. These factors indicate the need for a more streamlined, energy-efficient alternative, bringing us to tankless water heaters.

The Tankless Triumph

Tankless water heaters, also known as on-demand or instantaneous water heaters, have emerged as an energy-efficient and space-saving solution, aiming to rectify many of the limitations of their traditional counterparts. Based on a “heat-on-demand” principle, tankless models use high-powered burners or electric coils that allow the system to rapidly heat water as needed rather than storing it in a tank. The absence of storage renders standby heat loss a non-issue, significantly reducing energy consumption and utility bills.

Moreover, the on-demand nature of these water heaters ensures a continual supply of hot water, with no risk of a cold shower, making them particularly suitable for large households or commercial settings. So, due to their compact size, tankless water heaters can be conveniently installed in areas with premium space, like closets or under sinks. These potential space savings make tankless models popular for homeowners planning a remodel or building a new home.

The advantages of tankless water heaters also extend to their longevity, with many models offering 20 years or more compared to a traditional unit’s 10-15-year span. This factor, combined with energy savings, means tankless water heaters provide a substantial return on investment despite their higher upfront cost.

Factors to Consider

When determining which type of water heater is best for your home, there are several critical considerations to weigh:

Upfront Cost: While tankless water heaters are more expensive to purchase and install, their long-term efficiency and longevity can offset the initial investment over time.
Energy Efficiency: Tankless models are typically 8-34% more energy-efficient than their traditional counterparts, according to the US Department of Energy.
Hot Water Demand: Homes with a high demand for hot water may benefit most from tankless systems.
Space Considerations: The compact size of tankless heaters makes them an excellent choice in homes with limited space.
Ventilation: Tankless water heaters generally require a larger gas pipe and a new, sealed vent, a factor to consider during installation in your home.
Environmental Impact: Tankless water heaters can reduce water heating costs by up to 50%, resulting in a lower environmental impact. With their energy-efficient design, tankless models play a role in helping conserve energy resources and reduce greenhouse gas emissions. This is a significant advantage and a strong argument for environmentally conscious homeowners who favor tankless water heaters. So, the choice between traditional and tankless water heaters hinges on your home’s unique requirements, budget, long-term goals, and the convenience and energy efficiency you prioritize.

Conclusion

As we embark on a new season, upgrading your water heater offers a prime opportunity to enhance your home’s comfort, efficiency, and value. By weighing the differences between tankless and traditional models, homeowners can make a discerning choice that suits their needs, aligns with their eco-friendly aspirations, and leads to considerable energy savings. Whichever path you choose, the sound of hot water filling your morning shower accompanies a confident start to the day – reminding us that with proper care and consideration, every home can find its source of warmth and comfort.

www.poolesplumbing.com

A Comprehensive Guide to Home Plumbing Systems

April 23, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

A Comprehensive Guide to Home Plumbing Systems. From drips to disaster, every homeowner knows plumbing basics: a faucet that leaks or that mysterious sound of running water from an unseen source. But, as with many parts of homeownership, your plumbing can become a more complicated beast when things go wrong. This guide aims to demystify the world of home plumbing, from understanding the anatomy of your system to troubleshooting common issues and knowing when to call in the professionals.

The Basics: An Overview of Home Plumbing Systems

The heart of your home’s plumbing is the network of water supply and waste removal pipes. For most homes, this includes main water lines that run underground from the municipal water meter to the house and a series of secondary supply lines that branch out to various fixtures. The main waste pipe, known as the sewer line, carries waste from the home to the municipal sewer system or, in rural areas, a septic tank.

Critical Elements of Your Plumbing System:

Supply Lines: Deliver clean water to your faucets and appliances
Shutoff valves: Allow you to isolate water flow to specific fixtures or, in emergencies, to the entire house
Drainpipes: Carry waste water away from the house
Vents: Prevent airlocks in drainpipes, allowing waste to flow freely
Traps: Catch debris to prevent clogs and prevent sewer gases from entering the home

Your Day-to-Day Routine: How to Maintain Your Plumbing

In preventing costly repairs, proper maintenance helps. Here are some simple maintenance tips:

Check for leaks: Routinely inspect visible pipes and fixtures for signs of leaks.
Test faucets and shutoff valves: Make sure faucets aren’t dripping and shutoff valves are functioning
Avoid major clogs: Be mindful of what you flush or pour down drains; consider using drain screens and avoiding harsh chemical drain cleaners.

Common Issues, Easy Solutions: Troubleshooting Your Plumbing

Your plumbing system is remarkably robust, but it’s not invincible. Here’s a quick guide to troubleshooting and addressing some common plumbing issues:

Low water pressure: If you experience low water pressure in faucets and fixtures, this could be due to a partially closed shutoff valve or a blockage in the aerator on your faucet. First, check the valve; if it’s open, unscrew the aerator and clean out any debris.
Clogged drains: Most often caused by hair, soap, and other solids buildup. Plungers, drain snakes, and homemade remedies like baking soda and vinegar can usually do the trick, but severe clogs may require professional attention.
Running toilets: Typically caused by a faulty flapper, which fails to seal the water passageway after flushing. Replacing the flapper is a straightforward fix, but if you need clarification, a plumber can help.
Leaky faucets and pipes: Often the result of worn-out washers, O-rings, or gaskets. You can replace these yourself, but if in doubt, call a plumber to prevent water damage.

faucets and fixtures — Mason & Dixon Brothers: Custom sink basin design, petrified wood, hand-made deer head faucet, wall-mount design.

When to Call for Help: Signs Your Plumbing Needs Professional Attention

While a savvy homeowner can tackle many plumbing issues, there are sure signs that indicate you should call in a professional:

Persistent clogs: Regular clogs may indicate a more significant issue in your drainage system
Poor water quality: Rusty, foul-smelling water can indicate a problem within your water main
Noticing water stains or mold growth: These may indicate leaks or improperly vented appliances
Reduced pressure: Sudden changes in water pressure may signal a hidden leak
Unexplained water on floors or in cabinets

Addressing these issues promptly is crucial to prevent damage to your home and prevent escalating repair costs.

Beyond the Basics: Upgrading Your Plumbing System

Consider a system upgrade if your home is older or showing signs of plumbing system wear and tear. Newer technologies, like tankless water heaters, can improve energy efficiency and save money. Additionally, modern piping materials, such as PEX, offer longer-lasting performance than traditional copper or PVC and are less prone to freezing.

Remember, properly functioning plumbing is vital to keeping our homes comfortable and safe. Regular maintenance, understanding the basics of your plumbing system, and knowing when to call in the professionals can help ensure your plumbing works efficiently and effectively.

www.poolesplumbing.com

Mastering Bathroom Plumbing: A Step-by-Step Guide

March 25, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Bathroom Plumbing, whether you’re an aspiring plumber, a DIY enthusiast, or a homeowner looking to tackle bathroom repairs and installations, this guide is designed to help you understand the basics of plumbing a bathroom. This step-by-step guide will cover the essentials of plumbing a shower and a toilet and outline the essential tools you’ll need for the job.

By mastering these fundamental bathroom plumbing skills, you can save money on repairs, improve the functionality of your bathroom, and gain a satisfying sense of self-reliance. Remember, while DIY projects can be advantageous, always remember to consult or hire a professional plumber if a task becomes too complex or regulations require licensed work.

Tools You’ll Need

Plumbing Wrench
Plunger
Pipe Cutter
Teflon Tape
Adjustable Wrench
Screwdriver
Level
Hacksaw

Ensure you have all the necessary tools before starting your project, as being prepared makes the process smoother and safer.

How to Plumb a Shower

Step 1: Preparation

Before you begin, ensure you have access to your bathroom’s plumbing. Shut off the water supply to avoid any unwanted spills.

Step 2: Install the Shower Tray

If you’re installing a new shower, begin by placing your shower tray and ensuring it’s level. Use the adjustable wrench to adjust the feet of the tray or add shims as necessary.

Step 3: Connect the Waste Pipe

Connect the waste pipe to your shower tray’s waste hole. Ensure this connection is tight and sealed correctly to prevent leaks.

Step 4: Fit the Shower Unit

Mount your shower unit on the wall, following the manufacturer’s instructions. Ensure the connections to your water supply are secure and leak-free.

Step 5: Install the Shower Head and Controls

Attach the shower head to the unit and the controls to the wall. Use Teflon tape on any threaded connections to create a watertight seal.

Step 6: Test the Shower

Once everything is installed, turn on the water supply and check for leaks. Make adjustments as needed.

How to Plumb a Toilet

Step 1: Remove Existing Toilet (if applicable)

If replacing an old toilet, shut off the water supply and flush to remove any remaining water. Unscrew the bolts, lift the toilet, and scrape off any old wax ring material from the flange.

Step 2: Position the New Toilet Base

Place the new wax ring on the flange, put the toilet base over the ring, line up the bolts with the holes, and press down to create a seal.

Step 3: Secure the Toilet Base

Screw the nuts onto the bolts to secure the toilet base, being careful not to over-tighten and crack the porcelain.

Step 4: Attach the Toilet Tank

Set the tank on the base and secure it with the provided bolts and nuts, again avoiding over-tightening.

Step 5: Connect the Water Supply Line

Connect the water supply line to the tank and open the valve to fill the tank.

Step 6: Test the Toilet

Flush the toilet several times to ensure that it fills and drains correctly. Check around the base and the connection to the water supply for any signs of leaks.

Plumbing a bathroom requires attention to detail and a careful approach. Always double-check connections for leaks and ensure everything is secure and level. Practice makes perfect, and the more you work on plumbing, the more proficient you’ll become.

For those just starting, remember that every homeowner and professional plumber once knew nothing about plumbing—it’s all about learning and growth. Good luck with your bathroom plumbing projects, and may your pipes flow smoothly!

www.poolesplumbing.com

The Troublesome Effects of Hard Water on Your Plumbing System

March 11, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Hard Water – When it comes to maintaining a household, water quality is only sometimes the first thing on a homeowner’s mind. However, hard water presents a unique challenge that can impact your home’s plumbing system. Characterized by a high mineral content—calcium and magnesium—hard water can lead to inefficiencies, malfunctions, and even failures in the plumbing infrastructure. Here are the main problems caused by hard water and why it’s essential to address them.

Limescale Buildup: The Sneaky Culprit

Limescale is notorious for its silent but gradual accumulation. Forming a white, chalky residue due to the minerals in hard water, it sticks to the insides of pipes, fixtures, and appliances, often going unnoticed until the damage is significant. Over time, limescale can:

Clogged water pipes reduce the efficiency of water flow and increase the pressure within the pipes.
Create insulating layers inside water heaters and boilers, which may lead to higher energy consumption and premature wear.
Damage fixtures such as faucets and showerheads affect their functionality and aesthetic appeal.

hard water, Raleigh plumber — Shower head with hard water deposit all around the sprinklers

Reduced Water Flow: A Trickle of Trouble

A direct consequence of limescale buildup is the reduction in water flow. In showers and faucets, this can manifest as a weak stream that frustrates users and complicates daily tasks. In severe cases, clogged pipes could disrupt water supply to parts of the house, calling for costly plumbing repairs or replacement. Reduced flow also accelerates the wear and tear on your water-dependent appliances, which can lead to the following:

Increased energy bills due to decreased efficiency.
Reduced lifespan of appliances such as dishwashers and washing machines.
Inconsistent water heating results in uncomfortable temperature fluctuations during showers or washing dishes.

Corrosion: The Slow Destruction

While not as immediately noticeable as other issues, corrosion is a slow destroyer of plumbing systems in the presence of hard water. The mineral deposits not only react with the material of the pipes but also erode the inner surfaces over time. Corrosion can lead to:

It leaks as the pipe’s material weakens and eventually gives way.
Contaminated water, where corroded metal may seep into the water supply, poses potential health risks.
Expensive overhauls of plumbing systems due to widespread damage.

Conclusion

Hard water is a minor nuisance caused by additional cleaning to remove mineral stains. Yet its true impact lies beneath the surface, gradually compromising the integrity of your plumbing system. Homeowners need to be aware of these issues and consider water-softening solutions to mitigate the effects of hard water. Otherwise, they may face a relentless cycle of maintenance and repair that could otherwise be avoided with softer water.

Remember, the health of your plumbing is vital to the well-being of your home. By taking proactive steps against hard water, you protect your pipes and appliances and invest in the longevity and efficiency of your entire domestic water system.

Potential Health Impacts of Hard Water
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3775162/

www.poolesplumbing.com

Testing Your Sump Pump and Determining Its Lifespan

February 26, 2024/in Miscellaneous Plumbing, Plumbing Innovations, Plumbing Tips and Tricks/by raleigh plumbers

Testing your sump pump is essential in households with basements or crawl space access. It is designed to remove excess water that may accumulate in these areas due to heavy rainfall, melting snow, or rising groundwater. However, like any mechanical device, a sump pump can fail at any time, and it is crucial to test and maintain it regularly to ensure its proper functioning.

Why Test Your Sump Pump?

Regularly testing your sump pump is vital as it gives you peace of mind, knowing it will work when needed. It also allows you to identify potential issues early on and address them before they become more costly problems. Moreover, if there is a power outage or a sudden increase in water level, you will be confident that your sump pump can handle it.

How to Test Your Sump Pump

Testing your sump pump is a simple process that should be done at least twice a year. Here’s how:

Locate the outlet pipe: This will carry water from the sump pump to the outside of your home.
Check the power source: Ensure the sump pump is connected and plugged into a properly working outlet and connected to a ground fault circuit interrupter (GFCI) for added safety.
Fill the sump pit with water: Slowly pour enough into the sump pit until you reach your pump’s float switch or trigger point. This mimics how the sump pump would activate during a natural flood.
Observe the sump pump: As the water level rises in the pit, your sump pump should automatically turn on and start pumping out water. Once it reaches the bottom of the pit, it should shut off.
Check for any issues: While the sump pump is running, listen for any strange noises, vibrations, or leaks. If you notice anything unusual, it may be a sign of a problem that needs to be addressed.
Repeat the test: After the sump pump has turned off, refill the sump pit and repeat the process to ensure it turns on and off correctly.

If your sump pump fails to turn on or off during the test, it could indicate a malfunction that requires professional attention.

How Long Will a Sump Pump Last?

Testing Your Sump Pump, a sump pump lifespan will vary depending on several factors, such as quality, usage, and maintenance. On average, a sump pump can last 5-10 years. However, some high-quality pumps can last up to 25 years with proper maintenance.

Determining the Size of Your Sump Pump

The size of your sump pump is crucial as it determines its ability to handle water flow in your basement or crawl space. Here are some factors to consider when determining the size you need:

The size and depth of your basement or crawl space: Larger spaces require a bigger sump pump to handle more water.
The average rainfall in your area: If you live in an area with heavy rain, you may need a larger sump pump to keep up with the water flow.
The soil type around your home: Clay and compact soils tend to hold onto water, requiring a more powerful sump pump to remove it.

We recommend consulting a professional plumber at Pooles Plumbing or a sump pump specialist to help determine the right size for your needs.

Conclusion

Testing your sump pump regularly and understanding its lifespan and size requirements are crucial steps in maintaining a functional and efficient sump pump. Following these guidelines protects your home and investment from potential water damage caused by floods or rising groundwater. Prevention is always better than dealing with the aftermath of a failed sump pump. So, make it a priority to test and maintain your sump pump to keep your home safe and dry all year round.

www.poolesplumbing.com

Are bath bombs safe for your plumbing?

February 25, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Are bath bombs safe for your plumbing? Don’t Let This Popular Trend Harm Your Plumbing! Bath bombs are a popular item these days, and it’s no wonder why. They come in various colors, shapes, and scents, making bath time more enjoyable and relaxing. But if you’re worried about your plumbing when using a bath bomb, don’t be! This article will discuss what a bath bomb is and whether it can impact your plumbing.

What is a bath bomb, and why do I need one?

It is a hard-packed mixture of Epsom salts, amazing essential oils, and other ingredients that create a fizzy reaction when dropped in water. These delightful little balls are designed to add color, scent, and moisturizing agents to your bathwater, creating a spa-like experience in your home.

Bath bombs are typically made by mixing citric acid and baking soda, which, when wet, create a chemical reaction that produces carbon dioxide. This is what causes the fizzing sensation and gives off a delightful aroma. Many bath bombs also contain other ingredients, such as oils, salts, and butter, to enhance the overall experience.

Can Bath Bombs Affect Your Plumbing?

Many people wonder if the ingredients in bath bombs can clog or damage their plumbing. If you use them correctly, bath bombs should not adversely affect your pipes.

However, it’s important to note that some older homes may have outdated plumbing systems that could be more susceptible to clogging. If this is the case, it’s best to consult a professional plumber before using bath bombs regularly.

Tips for Using Bath Bombs Safely

To relax and ensure your plumbing stays in top shape while enjoying a relaxing bath bomb, here are some tips to keep in mind:

Use bath bombs sparingly: While they may be tempting to use every time you take a bath, limiting their use can help prevent potential issues.
Keep an eye on the drain: Run hot water for a few minutes after draining your bath to help flush any remaining residue down the pipes.
Use a filter: If you’re worried about small pieces of the bath bomb clogging your drain, use a filter or mesh bag over the drain before adding the bomb to your bath.
Don’t use too many at once: Using multiple bath bombs simultaneously may create excessive oils and butter, potentially causing a build-up in your pipes.

Conclusion

In conclusion, bath bombs are a fun and relaxing addition to any bath routine. They can elevate your self-care experience and leave you feeling rejuvenated. And with proper usage and maintenance, they should not adversely affect your plumbing. So treat yourself to a luxurious bath experience with the peace of mind that your pipes will be fine. Happy soaking! So, don’t let the fear of damaging your plumbing stop you from enjoying these delightful little creations. Just remember to use them wisely and take some precautions to ensure the health of your pipes. Questions? Contact Raleigh’s most trusted plumbers at Pooles Plumbing!

With that, you can sit back, relax, and let the bath bomb do its magic. Enjoy!

www.poolesplumbing.com

How to Avoid Plumbing Disasters Before a Date Night

February 12, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

How to Avoid Plumbing Disasters – As professional plumbers, we have seen our fair share of date nights ruined by unexpected plumbing disasters. These emergencies, from clogged toilets to burst pipes, can be stressful and embarrassing for you and your date. But fear not because with proper precautions and regular maintenance, you can avoid these disasters before they even happen.

Schedule Regular Plumbing Maintenance

— I know it may not be the most romantic thing to do, but scheduling regular plumbing maintenance is crucial in preventing any unpleasant surprises on date night. A professional plumber can inspect for signs of wear or damage to fixtures, pipes, and drains and address them before they become more significant. This will give you peace of mind and ensure that your plumbing system is in top shape for your special evening.

Be Mindful of What Goes Down the Drain

One common cause of plumbing disasters is clogs from items being flushed or put down the drain that shouldn’t be there. Before your date night, remind yourself and others to only human waste and toilet paper. Additionally, avoid putting grease, oils, and scraps from food down the kitchen sink, as this may clog your pipes. Consider installing drain covers or filters in your sinks and tubs to catch any hair or debris that could cause a backup.

Check Your Water Pressure

Having low water pressure may indicate an underlying plumbing issue, such as a leak or a clogged pipe. Before your date night, take a few minutes to check the water pressure in your home. You can do this by simultaneously turning on all faucets and showers and seeing if the pressure is consistent. Call a plumber to inspect for potential problems if there is a notice of any significant changes or fluctuations in pressure.

Know Your Shut-Off Valves

It’s essential in a plumbing emergency to know, locate, and mark precisely where the main water shut-off valve is situated in your home. This valve controls water flow into your home and can be crucial in preventing further damage from a burst pipe or severe leak. Ensure you and your household members know how to shut off the water supply in an emergency.

Have a Plunger Handy

Even with proper maintenance and precautions, emergencies can still happen. That’s why it’s always a good idea to have a plunger on hand in case of a clogged toilet or sink. Ensure you know how to use one properly – you don’t want to worsen the situation by misusing it.

Conclusion

Date nights are meant to be unique and stress-free, and with these tips, you can ensure that your plumbing won’t get in the way. Remember to schedule regular maintenance, be mindful of what goes down the drain, check your water pressure, know your shut-off valves, and have a plunger handy. By taking these precautions, you’ll be able to enjoy your date night without any unexpected plumbing disasters. Happy dating! So, these are some tips from a professional plumber’s perspective on avoiding plumbing disasters before a date night. With proper maintenance and precautions, you can prevent any unpleasant surprises and ensure that your special evening goes smoothly. Remember, taking care of your plumbing avoids disasters and maintains the functionality and longevity of your plumbing system. So, don’t wait for an emergency – schedule regular maintenance and keep your plumbing in top shape.

www.poolesplumbing.com

Common Plumbing Issues and How to Fix Them

Essential Plumbing Maintenance: Tips and Tricks from the Pros

January 30, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Essential Plumbing Maintenance: Developing or having plumbing issues is an inevitable part of owning a home. These problems, from clogs to leaks, can cause frustration and inconvenience if mishandled. However, with some basic knowledge and helpful tips or hints from the pros, you can learn how to handle these plumbing issues like a professional.

Understanding Your Plumbing System

Before delving into specific plumbing issues, you should understand your home’s system. Most homes have two central plumbing systems: the water supply system and the drainage system. The water supply system brings clean water into your home through pipes connected to a main water line, while the drainage system removes waste and used water from your home through drainpipes.

Don’t let plumbing issues, cut into your me time! Call Poole’s Plumbing in the Raleigh, NC Area today!

Common Plumbing Issues and How to Fix Them

Clogs

One of the most common plumbing issues homeowners face is clogged drains. Regularly clogged drains may be caused by a buildup of hair, grease, or other debris in your drain pipes. You will need a plunger and drain cleaner to clear a clog. Begin by using the plunger to create suction and loosen the clog. If that doesn’t work, try a drain cleaner that should be specifically designed for your type of clog. Please avoid using chemical drain cleaners, which can harm your pipes and the environment.

Leaks

Leaky pipes or fixtures can cause severe water damage if addressed slowly. To locate a leak, check all visible pipes and fixtures for any signs of water. You can also turn off the main water supply and check your water meter to see if it is still running, indicating a leak somewhere in your system. Depending on the location and severity of the leak, you may need to call a professional plumber for repairs.

Running Toilets

A continuously running toilet may seem minor, but it can waste significant water and increase your water bill. To fix this problem, check the toilet tank’s flapper valve to ensure it is sealing correctly. If needed, replace the flapper or any other damaged parts in the tank.

Low Water Pressure

Mineral buildup in pipes or a malfunctioning pressure regulator may cause low water pressure. To increase water pressure, try cleaning the aerator on your faucet or adjusting the water pressure regulator if you have one.

Prevention Tips for Future Plumbing Issues

Preventing plumbing issues before they happen is always the best course of action. Here are some helpful tips to keep your plumbing system in top shape:

Regularly clean and maintain your drains using a boiling hot water mixture of vinegar and baking soda or a natural drain cleaner.
Try to avoid flushing anything other than toilet paper down the toilet to prevent clogs.
Replace and inspect pipes for any signs of leaks or corrosion.
In an emergency, always know where your main shut-off valve is located.

By following these tips and understanding your plumbing system, you can handle common plumbing issues like a pro. However, if the problem is beyond your expertise or requires specialized equipment, please call a plumber at Pooles Plumbing for assistance. Proper maintenance and prevention are crucial to keeping your plumbing system functioning smoothly.

Helpful Links: North Carolina Building Code – Plumbing Only

www.poolesplumbing.com

How to Install a Dishwasher

January 22, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

How to install a Dishwasher — Installing a dishwasher may seem daunting, but even if you are not a professional plumber with years of experience, I can assure you that it is easier than it may seem. In fact, with the right tools and knowledge, you can easily install a dishwasher in your home without having to call for professional help.

Gather the Necessary Tools

Before you begin the installation process, ensure you have all the necessary tools. These include a dishwasher installation kit, a screwdriver, pliers, and an adjustable wrench. It is also essential to purchase, or if you have on hand, safety gear items like gloves and goggles and clothing cover-ups to protect yourself from any potential hazards.

Turn Off the Water Supply

The first step in installing a dishwasher is to turn off the water supply, which may be done by closing the shut-off valve under your sink. If you cannot locate the shut-off valve, you may need to turn off the main water supply to your home.

Prepare the Area

Next, prepare the area where you will be installing the dishwasher. Ensure enough space for the dishwasher to fit comfortably and the floor is level. It is also essential to ensure no obstructions in the way, such as pipes or wires.

Connect the Water Supply

Once you have prepared the area, it’s time to connect the water supply. This is usually done through a flexible hose connected to the hot water valve under your sink. Make sure the hose is securely attached and that there are no leaks.

Install the Drain Line

Next, you will need to connect the drain line. This is usually done by attaching a flexible drain hose from the dishwasher to your kitchen sink’s drain pipe. You may need to secure the hose with clamps to prevent any leaks.

Secure the Dishwasher in Place

Now that you have connected the water supply and drain line, it’s time to secure the dishwasher. Use screws to attach the dishwasher to the surrounding cabinets to prevent it from tipping over during use.

Test the Dishwasher

Once everything is securely in place, turn on the water supply and test your dishwasher. Run a cycle to ensure no leaks, and the dishwasher is functioning correctly.

Final Checks

Before considering the installation process complete:

Take the time to do some final checks.
Make sure all connections are secure and that there are no leaks.
Check that the dishwasher is level and that the door can open and close properly.

Additional Tips

Here are a few additional tips to make your installation process smoother:

Always read the instruction manual carefully before beginning the installation.
Make sure to use the correct size and type of screws for attaching the dishwasher.
If drilling holes in cabinets, be extra careful not to hit wires or pipes.
Before installing, turn off all power sources in the area to prevent any potential electrical accidents.
If you need clarification on any step in the process, seek professional help.

Conclusion

Installing a dishwasher may seem intimidating, but proper preparation and caution can be easily accomplished. Always prioritize safety and follow the manufacturer’s instructions for best results. Remember, if you have any issues or questions, seek a professional for help.

www.poolesplumbing.com

Maintaining Your Water Heater Essential Knowledge

January 9, 2024/in Miscellaneous Plumbing, Plumbing Tips and Tricks, Seasonal/by raleigh plumbers

Maintaining your water heater is an important task that should be noted. Having a well-maintained water heater can last up to 15 years, while a neglected one may only last half as long. You can also save money on utility bills and improve energy efficiency by performing regular maintenance.

Here are some essential tips for maintaining your water heater:

An important safety feature of your water heater is the pressure relief valve. It helps prevent excessive pressure buildup, which may be hazardous and cause damage to your system. To check the valve, lift it and let it snap back into place. If you hear a gurgling sound or notice small amounts of water trickling out, this is a sign that the valve may need to be replaced.

Drain and flush your tank

Over time, sediment and minerals can accumulate in your water heater tank, causing buildup, which may lead to corrosion and reduce the efficiency of your system. To help prevent this, it is recommended to drain and flush your tank at least once a year. Doing this will help remove any sediment or debris built up and keep your water heater functioning properly.

Inspect the anode rod

A sacrificial metal component is the anode rod, which helps protect your water heater from corrosion. Over time, this rod can become depleted and may need to be replaced to maintain the optimal performance of your system. Inspecting the anode rod every 3-5 years and replacing it if necessary is recommended.

Insulate your water heater

Insulating your water heater may improve its energy efficiency by reducing heat loss. This is especially important for older models or those in unheated areas such as garages or basements. You may also purchase a pre-cut insulation blanket or use a DIY method with fiberglass insulation.

Check for leaks

Regularly checking for leaks is vital to catch and address any potential issues before they become costly problems. Inspect the fittings, pipes, and connections for signs of leakage. If you notice any water pooling around your water heater, it’s best to call a professional plumber to fix the issue.

In addition to these tips, you should be familiar with the specific maintenance requirements for your water heater. Different water heaters (such as gas or electric) may have different maintenance needs. Consult the manufacturer’s manual for recommended maintenance tasks and intervals.

Conclusion

Your water heater is essential to your home’s plumbing system and requires regular maintenance to stay in top condition. Regularly checking the pressure relief valve, draining and flushing your tank, inspecting the anode rod, insulating your water heater, and checking for leaks help your system to last and be efficient. Remember to consult your manufacturer’s manual for specific maintenance requirements. Keep your home safe, efficient, and comfortable with these essential tips for maintaining your water heater.

Additional Tips

Keep your water heater’s temperature to 120°F (49°C) to prevent severe burns or scalding and to save energy.
Testing the temperature and pressure relief valve once a year ensures it functions appropriately.
Hiring a professional plumber for complex maintenance tasks or if you need help performing them yourself. They can also help identify potential issues with your water heater and address them before they become significant problems.
If you have hard water, consider installing a water softener to help reduce mineral buildup in your water heater and other appliances.
Keep the area around your water heater clean and clutter-free for easy access during maintenance checks.

Regular maintenance is vital to keeping your water heater running smoothly and efficiently. Make it a priority to incorporate these tasks into your annual home maintenance routine, and you’ll have peace of mind knowing that your water heater is in good condition. Contact Pooles Plumbing with any concerns.

www.poolesplumbing.com

The Ultimate Guide to Water Filtration Systems for Your Home

December 14, 2023/in Miscellaneous Plumbing, Plumbing Innovations, Plumbing Tips and Tricks/by raleigh plumbers

Water is a basic necessity of life, and as homeowners, it’s important to ensure that the water we consume and use in our homes is safe and clean. While water filtration systems have been in use for decades, the latest technology and advancement have brought about newer and more efficient ways to filter water. Choosing the right water filtration system can seem like a daunting task as there are several options available on the market. In this blog, we’ll explore the different types of water filtration systems available for residential homes, compare the latest technology for water filtration and highlight the benefits and cons of each. We’ll also take a look at the most purchased or installed filtration system in the United States and what’s likely to be installed in the North Carolina region.

Reverse Osmosis Filtration System:

Reverse osmosis systems work by sending water through a semi-permeable membrane that filters out impurities. They are effective at removing particles like silt, rust, and chlorine while also removing harmful contaminants like bacteria, viruses, and heavy metals. However, these systems are slow and can waste a lot of water, as it uses about three to four times more water than it produces.

Carbon Filtration System:

Carbon filtration systems work by using activated carbon to absorb impurities from the water. They are effective at removing chlorine, volatile organic compounds (VOCs), and sediment from the water. These are the most common types of water filters used in homeowner’s refrigerators. However, they are less effective at removing minerals, fluoride, and other contaminants that aren’t easily absorbed by carbon.

UV (Ultraviolet) Disinfection System:

UV disinfection systems work by using ultraviolet light to kill bacteria and viruses found in the water. They work best in conjunction with another filtration system as they’re not effective in removing particulate matter or other contaminants. while they are effective at killing bacteria and viruses, the bulbs must be replaced periodically and are expensive.

Water Softener System:

Water softeners work by removing hard ions and minerals from the water, mainly magnesium and calcium. They basically replace the minerals with salt ions to make the water “softer”. Water softeners are effective at reducing the hard water spots caused by hard water, and it prevents damage done to clothes when using hard water to wash them. However, it can have a negative effect on people who have high blood pressure, and the excessive sodium content is harmful to the environment.

Ceramic Filtration System:

Ceramic filtration systems work by using a porous ceramic filter to trap bacteria and other microorganisms. These are typically promoted for outdoor use and areas without access to mains water. While they are easy to clean and maintain, they are less effective at treating other contaminants like sediment and minerals.

In conclusion, choosing the right water filtration system depends on the specific needs and concerns of your household. It’s important to take into account the types of contaminants present in your water, and the possible effects of the type of water you consume.

In the United States and North Carolina region, most water filtration systems in use are carbon-based and UV disinfection systems. Water filtration technology continues to evolve and improve, and we expect to see even more efficient and effective systems in the future. We encourage you to consult with a professional to determine which type of filtration system is best for your household and protect your family until some sort of universal filtration system can be enacted at a community level. Contact Poole’s Plumbing for a Water Filtration Consultation, we can help you select the right system for your home.

What Projects Do Plumbers Do?

December 9, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

What Projects Do Plumbers Do? — When you think of a plumber, the first thing that probably comes to mind is fixing a leaky faucet or unclogging a drain. However, plumbers do much more than that. They are skilled professionals who specialize in working with water supply and drainage systems. In this blog post, we will take a closer look at the various projects plumbers do and how they can benefit you as a homeowner.

Installation of Plumbing Systems

One of the most critical projects plumbers do is installing new plumbing systems. This can include the installation of a new water heater, pipes, toilets, showers, and sinks. Plumbers are trained to assess your home’s water supply and drainage needs and can help you choose the best installation systems. They will also ensure that everything is installed correctly and working properly.

Repair and Maintenance of Plumbing Systems

Plumbing systems can develop problems over time and require repairs or maintenance. Plumbers can fix issues such as leaks, clogs, broken pipes, and malfunctioning water heaters. They also offer regular maintenance services such as drain cleaning and water heater flushing to prevent problems from occurring in the first place. Regular maintenance can prolong the life of your plumbing system and save you money in the long run.

Bathroom and Kitchen Remodels

If you are planning a bathroom or kitchen remodel, a plumber should be part of your team. Plumbers can help you design your new space and install new plumbing systems and fixtures to make your vision a reality. They can help you choose the best materials and methods for your budget and needs. A professional plumber can ensure your remodel is done correctly, on time, and within budget.

Water Treatment and Purification Systems

Plumbers can also help you improve the quality of your water supply by installing water treatment and purification systems. These systems can remove impurities, chemicals, and pollutants from the water supply in your home. They can also improve the taste and smell of your water. A plumber can help you choose the best water treatment and purification systems that meet your needs.

Emergency Plumbing Services

Plumbing emergencies can happen at any time, day or night. Plumbing emergencies such as burst pipes, overflowing toilets, and broken water heaters can cause a lot of damage to your home if not addressed immediately. That’s where emergency plumbing services come in. Plumbers can respond quickly to your emergency and fix the problem before it causes too much damage.

Learn more about the ongoing education and certification of a plumber at the he American Society of Plumbing Engineers website. https://www.aspe.org/about/education-research/

Conclusion: Plumbers do much more than fix leaky faucets and unclog drains. They are skilled professionals who can help install, repair, and maintain your home’s plumbing system. They can also help with bathroom and kitchen remodels, water treatment and purification systems, and emergency plumbing services. As a homeowner, hiring a professional plumber can save you time, money, and stress in the long run. So, the next time you have a plumbing problem, remember that a plumber can handle much more than just a leaky faucet — Contact Poole’s Plumbing Certified Professional Raleigh Plumbers for all your plumbing needs.

What can you pour down a toilet to unclog it?

November 20, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

What can you pour down a toilet to unclog it? Let’s start with things that should never go into your toilet. It’s the season to be jolly, but it’s also the season where we tend to throw caution out of the window and do things we usually wouldn’t. One thing that you should never let your guard down is what you flush down your toilet.

You may think everything goes down the drain, but that couldn’t be further from the truth. Certain things can cause blockages or damage your plumbing system, while others can harm the environment. Here are some of the most common items you should never flush down your toilet.

Cat poop

You may think it’s convenient to flush away your cat’s business, but it harms your plumbing and the environment. Cat poop can contain parasites and bacteria, which may contaminate water sources and harm marine life. It’s best to scoop it into a bag and throw it in the trash.

Non-flushable wipes

Even if they say “flushable” on the packaging, wipes should never be flushed down your toilet. These “flushable” wipes do not break down like toilet paper and can cause significant blockages in your plumbing.

Toys

Children’s toys may seem harmless fun, but when they accidentally end up in the toilet, they can cause serious clogs. Keep an eye on your little ones to make sure they don’t try to flush their toys down the toilet.

Feminine hygiene products

Tampons and pads are designed to absorb liquids, which can expand and cause blockages in your plumbing. These products should always be disposed of in the trash, even if the packaging says they are safe to flush.

Dental floss

Dental floss may seem harmless, but it’s not biodegradable and can easily get tangled in your plumbing pipes. It’s best to dispose of it in the trash or look for biodegradable floss options.

Medications

So, flushing expired or unused medications down the toilet may seem convenient, but it harms the environment. These chemicals can end up in our water sources and harm aquatic life. Instead, dispose of them properly at a local pharmacy or through designated medication disposal programs.

Cooking grease and oil

Dispensing or getting rid of cooking grease and different cooking oil down the drain may seem like an easy way to get rid of it, but it can solidify in your plumbing pipes and cause major clogs. It’s best to dispose of these substances in separate containers and throw or dispose of them in the trash.

Things you should never put down your toilet

Q: What can you pour down a toilet to unclog it? A: Make a safe drain cleaner

Add these ingredients to your clogged toilet bowl and let it sit overnight. Flush the following day to see if the clog will clear.

1 cup of baking soda
2 cups of vinegar
1/2 gallon of hot water
1 tablespoon of dish soap

Conclusion

Remember, just because something fits down your toilet doesn’t mean it should be flushed. Avoid these everyday items to keep your plumbing and the environment safe.

Stay smart, stay witty, and continually educate yourself on proper disposal methods for different types of waste. Let’s ensure our plumbing systems and the planet are happy and healthy for years to come. So, enjoy the holiday season responsibly, and don’t let anything but toilet paper go down your toilet! Please keep it clean and safe, and have a very merry (and clog-free) holiday!

Remember, prevention is always better than dealing with a plumbing emergency.

Happy flushing! Stay informed, stay cautious, and keep your toilet free of anything that doesn’t belong there.

www.poolesplumbing.com

Sump-Pump Failure

November 13, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Preventing Basement Flooding Due to Snow Melt and Sump-Pump Failure

A common issue for homeowners is when basements flood, especially during the winter months when snowmelt can cause sump pumps to fail. A flooded basement not only causes property damage but may also lead to mold growth and other health hazards. In this article, we’ll discuss why basement flooding occurs and provide some tips to prevent it from happening.

Why Does Basement Flooding Occur?

Basement flooding due to snow melt and sump-pump failure results from two main factors – excess water and malfunctioning sump pumps.

During the winter, snow accumulates on the ground. As temperatures rise, this snow will melt and turn into water. If there is excessive snow on the ground, it can lead to an influx of water in your basement.

To prevent flooding, homeowners typically rely on sump pumps – devices that remove excess water from basements and crawl spaces. However, these pumps can fail for various reasons, such as power outages, mechanical issues, or clogs.

Causes of Sump-Pump Failure

So, there are several reasons why your sump pump may fail. These include:

Power Outage: If there is a power outage, your sump pump won’t be able to do its job. This is why it’s essential to have some backup power source, such as a backup battery or generator.
Switch Failure: The switch that activates the sump pump may become stuck due to debris or mechanical issues. This can prevent the pump from turning on when needed.
Clogged Discharge Pipe: If the discharge pipe is stopped, the sump pump won’t be able to drain water properly.
Incorrect Installation: If your sump pump is not installed correctly, it may fail to function properly. This is why it’s essential to hire a professional for installation.

How to Prevent Basement Flooding Due to Snow Melt and Sump-Pump Failure

1. Keep an Eye on Weather Forecasts:

During winter, it’s essential to stay updated with weather forecasts. If there is a significant snowfall predicted, take preventive measures such as shoveling snow away from your home’s foundation and clearing your sump pump discharge lines.

2. Install a Backup Generator:

Power outages are a common cause of sump pump failure. By installing a backup generator, you may ensure that the sump pump that is also installed will keep running even during power outages.

3. Invest in Regular Maintenance:

To prevent mechanical failures, you must invest in regular maintenance for your sump pump. This includes checking the pump’s float switch discharge lines and cleaning any debris or clogs that may have accumulated.

4. Consider a Battery Backup:

In case there are power outages, a battery backup sump pump can come in handy. They are designed to automatically kick in when the primary pump fails, ensuring your basement stays dry even during power outages.

5. Be Mindful of Your Landscaping:

If your home is built on a slope, consider landscaping techniques such as grading and installing drainage systems to divert water from your home’s foundation.

6. Act Quickly in Case of Flooding:

Despite taking preventive measures, sometimes flooding can still occur. If this happens, immediately mitigate the damage and call a professional for assistance.

Conclusion

Basement flooding due to snow melt and sump pump failure can be a headache for homeowners. However, by staying proactive and taking preventative measures, you may minimize the risk of this issue occurring in your home.

Remember to check weather forecasts, invest in regular maintenance for your sump pump, and consider backup options to keep your basement dry and your home safe. Stay informed and prepared to avoid any unwanted surprises this winter season.

The snow may be falling outside, but with these fantastic tips, you can ensure that your basement stays dry and cozy all winter long. Monitor the weather and take the necessary precautions to prevent flooding due to snow melt and sump pump failure. And in case of any unexpected flooding, remember to act quickly and call for professional help. Stay smart and stay safe!

So go ahead, build that snowman, and enjoy the winter wonderland outside without worrying about a flooded basement.

Happy winter! www.poolesplumbing.com

A Comprehensive Guide to Water Heater Maintenance: Winter is Coming!

October 26, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Water Heater Maintenance is a crucial part of a healthy home. As the days become shorter and the temperature drops, it’s a clear sign that winter is coming. While you may be busy preparing your home for the colder months ahead, one crucial aspect often gets overlooked – your water heater.

Many must realize how important it is to properly care for and maintain their water heater during the winter. Not only can neglecting it lead to costly repairs, but it can also result in a lack of hot water when you need it most. Follow these tips to ensure your water heater is unscathed through the cold winter months.

Water Heater! Insulate It!

Insulating your water heater is one of the best ways to protect it from the harsh winter weather. This involves wrapping a layer of insulation around the tank and pipes to help prevent heat loss. Not only will this keep your water warm for longer, but it can also save you money on your energy bills.

You can purchase pre-cut insulation blankets specifically designed for water heaters at most hardware stores. Alternatively, you can use a regular insulation material and cut it to fit your tank and pipes. Just be sure not to cover any venting or safety devices.

Drain Your Water Heater

Before the temperature drops below freezing, you’ll want to drain your water heater. This is especially important if you have an older model that could be more efficient at preventing freezing temperatures from damaging the tank.

Following these steps will allow for proper drainage of your water heater:

Turn off the power or gas supply to your water heater.
Connect your outdoor water or gardening apparatus to the drain valve, which is located at the bottom of the tank, and then run it outside to drain correctly.
Open a hot water tap in your home to allow air into the tank as it drains.
Open the drain valve and let all the water drain out.
Once the tank is empty, close the drain valve and turn on the cold water supply to flush out any remaining sediment.
Be sure to disconnect the hose and turn off the hot water tap before turning the power or gas back on.

Inspect Your Anode Rod

The anode rod in your water heater is essential in preventing corrosion and extending the life of your tank. However, it can quickly deteriorate if not properly taken care of. Before winter arrives, check your anode rod and replace it if necessary.

To check your anode rod:

Your water heater’s power or gas supply should be turned off.
Inspect and locate the anode rod on top of the tank.

It should have a hexagonal head.

Unscrew the anode rod and inspect it for any signs of deterioration, such as heavy pitting or a thinning rod.
If necessary, replace the anode rod with a new one.

Keep Your Water Heater Warm

If your water heater is in a cold area, such as a basement or garage, keeping it warm during the winter is essential. This will not only help prevent freezing but also improve its efficiency.

You can use a space or heat tape to warm your water heater. Just be sure to only place something directly on top of the tank.

Schedule Regular Maintenance

Last but certainly not least, schedule regular maintenance for your water heater. A professional plumber can inspect and service your water heater to ensure it’s in top working condition for the winter.

Winter is coming, so don’t neglect your water heater! Following these tips ensures that your hot water supply stays consistent and reliable throughout the colder months. So, a little maintenance now can save you from costly repairs later on. Stay warm and enjoy your hot showers all winter long!

As our days grow shorter and the temperature drops, it’s a clear sign that winter is coming. While you may be busy preparing your home for the colder months ahead, one crucial aspect often gets overlooked – your water heater.

Many must realize how important it is to properly care for and maintain their water heater during the winter. Not only can neglecting it leads to costly repairs, but it can also result in a lack of hot water when you need it most. Follow these tips to ensure your water heater is unscathed through the cold winter months.

www.poolesplumbing.com

7 Scary Plumbing Issues That Will Haunt You This October!

October 16, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

7 Scary Plumbing Issues — It’s officially October – the month of Halloween, when ghosts and ghouls come out to play. But while you may be prepared for spooky costumes and haunted houses, some plumbing issues can scare you. From creepy crawlies in your pipes to mysterious leaks appearing out of nowhere, seven plumbing issues will haunt you this October.

1. Clogged Pipes = Blocked Drain

Just like ghosts can block your path in a haunted house, clogged pipes can block water flow in your home. This can lead to blocked drains and sewage backflow into your sinks, toilets, or bathtubs. To avoid this terrifying scenario, properly dispose of waste and avoid flushing items that can cause clogs, such as feminine hygiene products or wipes.

2. Water Hammer = Haunting Sounds

Have you ever heard strange noises coming from your pipes? That could be the sound of a water hammer – a scary plumbing issue caused by sudden changes in water flow. This can not only be annoying but also damaging to your pipes. So, if your goal is to fix this issue, a professional plumber can install water hammer arrestors to regulate the pressure in your pipes.

3. Leaky Faucets = Drip, Drip, Drip

Few things are more annoying than a dripping faucet, especially if it’s in the middle of the night and you’re trying to sleep. But aside from the eerie sound, a leaky faucet can also waste gallons of water and increase your water bill. If you hear a dripping sound this month, don’t wait until it becomes a full-blown horror story – call a plumber to fix the issue or if you need it scary fast, call Poole’s Plumbing at 919-661-6334 in the Raleigh, NC area.

4. Frozen Pipes = Chilling Consequences

As temperatures drop in October, your pipes may be at risk of freezing. And just like a frozen heart in a ghost story, frozen pipes can cause significant damage to your plumbing system. This may be prevented from happening. Insulate all exposed pipes and keep your home at a consistent temperature.

5. Gas Leaks = Deadly Haunts

Gas leaks are not only scary but also extremely dangerous. The last thing you want during the spooky season is to deal with a gas leak, which can lead to fires and explosions. Ensure a professional plumber checks your gas lines regularly to ensure everything functions correctly.

6. Sewage Backup = The Ultimate Nightmare

No one wants to imagine sewage backing up into their home, but unfortunately, it’s a reality for many homeowners. This can happen due to clogs, tree root intrusion, or damaged pipes. To avoid this terrifying situation, schedule regular drain inspections and address any issues immediately.

7. Creepy Crawlies = Unwanted House Guests

Last but not least, a plumbing issue that will haunt you in more ways than one – creepy crawlies in your pipes. These can include insects, rodents, and even snakes. To prevent these unwanted house guests from entering your home through the plumbing system, properly seal any openings or cracks in your pipes.

So this October, don’t just focus on the ghosts and ghouls outside – be prepared for the spooky plumbing issues that could arise in your home. So, by taking preventive measures and addressing any issues promptly, you can avoid being haunted by these plumbing nightmares. And if you do encounter any of these issues, don’t hesitate to call a professional plumber for help – they’ll slay those scary plumbing problems for you! So this October, be on the lookout for any spooky plumbing issues and rest assured that by knowing the proper knowledge and precautions, you can keep your home safe and sound.

Stay spooky, but keep your plumbing in check! Don’t let these scary plumbing issues haunt you this October – be proactive and take care of your pipes to avoid spooky surprises.

Remember, prevention is always better than dealing with a nightmare situation.

www.poolesplumbing.com

Water Leak Inside Your Walls

October 11, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Water Leak Inside Your Walls, Steps to Find and Fix

Water Leaks? A major headache for homeowners. They not only cause damage to your property but can also lead to more significant problems like mold and mildew growth. One of the most frustrating types of water leaks is those inside your walls, which can be challenging to detect and fix. This information will help you find a water leak inside your walls caused by plumbing issues and what to do.

Step 1: Look for Signs of Water Damage

The first step in finding a water leak inside your walls is to look for any signs of water damage. This could include peeling paint or wallpaper, bubbling drywall, or water stains on the walls or ceiling. You may also notice a musty odor in the affected area. These signs can indicate a leak inside your wall, even if you cannot see any visible water.

Step 2: Check Your Water Meter

If you suspect a water leak, the next step is to check your water meter. Ensure all faucets and water-using appliances are turned off, then check the meter to see if it is still running. If the meter is still moving, this may indicate that you could leak somewhere in your plumbing system.

Step 3: Test Your Toilet

Toilets are a common source of hidden water leaks. So, add a few drops of food coloring to the tank to test your toilet, and wait 20 minutes. If you see the water in the toilet bowl change color, it means there is a leak between the tank and the bowl.

Step 4: Use a Moisture Meter

If you cannot locate the leak’s source, you may use a moisture meter to help pinpoint its location. These tools measure the moisture in your walls and can help you determine the extent of the damage. It is best to use a moisture meter specifically designed for building materials.

Step 5: Call a Professional Plumber

If you have tried all these steps and still cannot find the source of the leak, it is time to call a professional plumber. They have specialized equipment and expertise to locate and fix hidden water leaks. To prevent further damage to your home, it is essential to contact a professional if you cannot find or fix the source of the leak.

Step 6: Fix the Leak and Repair Any Damage

Once the leak has been located, it is crucial to fix it immediately. Depending on the severity of the leak, you may need to replace pipes or tighten a loose connection. After selecting the leak, you will also need to repair any damage caused by the water. This may include replacing drywall or flooring and addressing mold and mildew growth.

Step 7: Take Preventative Measures

It is essential to take preventative measures to prevent future water leaks inside your walls. This includes regular plumbing system maintenance, such as checking for leaks and repairing them promptly. Consider installing water leak detection devices, alerting you to potential leaks before they become a bigger problem.

The EPA website is a great resource, Our Water section check out the Fix a leak week here.

Conclusion

Water leaks inside your walls caused by plumbing issues can sometimes be challenging to detect and fix, but with these steps, you can minimize the damage and get your home back to normal. Remember always to take immediate action regarding water leaks, and don’t hesitate to call a professional if you need help locating or fixing the issue.

You can have peace of mind that your home stays safe from hidden water leaks in the future with proper maintenance and preventative measures. So, remain vigilant and take care of any plumbing issues before they become major headaches for you and your family. Keep these steps in mind, and you’ll be able to identify and fix a water leak inside your walls quickly. With these tips, you can effectively handle plumbing issues and maintain a healthy and functional home. So, remember to always stay on top of maintenance and address any leaks promptly to protect your property from damage. With the proper knowledge and steps, water leaks don’t have to be a significant headache. Take control of your home’s plumbing and keep it leak-free!

www.poolesplumbing.com/

How-Much-Does-it-Cost-to-Put-in-a-Full-Bathroom-in-Your-Basement

Bathroom Remodel

September 28, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Bathroom Remodel: How Much Does it Cost to Put in a Full Bathroom in Your Basement? If you’re looking for an affordable way to add value and convenience to your home, adding an additional bathroom to your basement or another living space is an excellent choice. But how much will this project cost you?

The answer may depend on several factors, such as the size of the bathroom if it’s a bathroom remodel or a new bathroom, the materials used, and even the local labor costs. Generally speaking, installing a full bathroom in the basement can range from around $7,000 to upwards of $30,000.

The average cost for a basic complete bathroom installation is usually around $15,000 for labor and material costs. This includes tiling the floors and walls, installing a shower or bathtub, plumbing the fixtures, and running new electrical wiring.

In addition to the labor and material costs, you’ll need to factor in additional expenses for any necessary permits or inspections from your local municipality. Depending on your home’s location, this can range from several hundred dollars to over $2,000.

If you want to maximize your budget for your bathroom remodel, you can cut costs in a few ways. For example, you could do the work yourself instead of hiring a professional plumber or contractor. Additionally, opting for lower-end plumbing fixtures and finishes will reduce the project’s overall cost.

No matter what bathroom design options you choose, it’s essential to consider the long-term value a basement bathroom can bring.

From providing greater convenience and comfort to increasing your home’s resale value, it’s an investment that will pay off for years.

Ultimately, the cost of installing a full bathroom in your basement depends on many factors and is ultimately up to you. You can find the best solution that fits your budget and lifestyle by carefully considering all available options.

Good luck!

Bathroom Remodel

Note: Keep in mind that this is just a general guide to the costs associated with basement bathroom installation; it’s highly recommended to consult with a professional contractor for a more accurate cost estimate. Additionally, be sure to follow all local safety and building codes when undertaking any home improvement projects. Doing so will ensure your basement bathroom is safe and up to code.

Additionally, there are various financing options available if you need help covering the upfront cost of your project. Loans from online lenders, credit unions, or even local banks can be great resources for getting the money you need to complete your basement bathroom renovation.

No matter what route you take, installing a full bathroom in your basement is an excellent way to transform your home and add significant value. With enough research and planning, you can easily find the best options for your budget and lifestyle needs.

Contact Pooles Plumbing for all your plumbing needs. Happy renovating!

www.poolesplumbing.com

Source of Rusty Water

August 25, 2023/in Miscellaneous Plumbing, Plumbing Tips and Tricks/by raleigh plumbers

Source of Rusty Water, Once you have identified rusty water, the next step is to determine its source. Often, rusty water originates from one or more of the following sources:

Corroded pipes in your plumbing system
Corroded parts inside your water heater
Outside sources, such as healthy water containing high iron levels

If you need help determining where the rusty water might come from, let’s start by visually inspecting all exposed piping in your home. Look for any areas where rust has accumulated and note any pipe corrosion or other signs indicating something wrong with the piping. Additionally, check the area around your water heater for any leaks causing rust buildup near the unit.

If you don’t find any signs of rust or corrosion around the exposed piping, your next step is to check your water heater for signs of decay or rust inside the tank. You can do this by draining a few gallons from the bottom of the tank and inspecting it for any discoloration or debris that may indicate a problem.

Finally, suppose all else fails, and you still can’t determine where the rusty water is coming from. In that case, it is time to call a professional plumber to inspect your plumbing system and diagnose any issues they find. A professional will be able to check your entire plumbing system more thoroughly than you can on your own, ensuring that no underlying issues are left unresolved.

By following these steps, you should be able to identify and address the source of rusty water in your plumbing system. Doing so will help ensure that your home remains clean and safe while protecting any appliances or fixtures from unnecessary damage due to rust buildup.

If you are dealing with rusty water regularly, have a professional inspect your plumbing annually to avoid any long-term issues caused by corrosion or rust accumulation; taking proactive measures now can save you time, money, and hassle down the line!

Next, it’s essential to understand the cause of rust in your plumbing system. High levels of dissolved iron in the water supply usually cause rust. If you have hard water, there could be elevated amounts of iron present, causing discoloration or rust buildup over time. Additionally, if any exposed piping has gone without proper maintenance for some time, corrosion and rust accumulation could occur due to contact with moisture from the air or surrounding environment.

To reduce the risk of rusty water in your home, maintain all exposed pipes and fixtures regularly and inspect your water heater for signs of corrosion or rust accumulation. It’s also essential to periodically test the quality of your home’s drinking water to ensure it is safe and free from any potential contaminants.

By following these steps, you can help protect your plumbing system from developing problems due to rusty water and keep your home running smoothly. If you’re ever in doubt about what could be causing an issue with your plumbing system, don’t hesitate to call a professional plumber for assistance!

The source of rusty water can often remain hidden until it has caused significant damage to both the plumbing system and the fixtures that rely on it. That is why it is so important to act quickly and take steps to identify the source of rusty water if you are ever dealing with it in your home. Follow these tips to help ensure that you can find its source and address any issues it may be causing.

By staying on top of regular maintenance and inspecting exposed piping for rust or corrosion, you can watch for any potential problems before they worsen. Also, regularly examine your water heater since corrosion or rust buildup inside the tank could lead to rusty water coming from your faucets or showerheads. Suppose none of these measures seem to work, and you still need to find out where the rusty water is coming from. In that case, it’s time to call a professional plumber to help you diagnose the issue and take the necessary steps to get your plumbing system back up and running correctly.