Clear-a-Clogged-Drain-Pooles-Plumbing

You Can Do It: Identify and Clear a Clogged Drain

/in , , /by

In this, the final entry in our series on clogged drains, we will once again advise on how to identify and Clear a Clogged Drain. Continuing where we left off in our second blog entry, these pointers from Poole’s Plumbing can help achieve early detection and likewise, detect and Clear a Clogged Drain before there is a huge mess.

Removing the drain stopper and any debris is a good start to clearing the drain.

Trust in Poole’s Plumbing and Clear Your Mind…oh, and Your Sink Drain!

Once again, we are aware of the common thoughts when one realizes they have any plumbing issue. However, your trusted friends at Poole’s Plumbing once again can set a worried mind at ease. With some easy to remember pointers, you can locate and Clear a Clogged Drain and feel confident doing so.

We will use the example of a clogged kitchen sink to walk you through several steps. To begin on your path to Clear a Clogged Drain, first, take these simple measures.

  • Remove the Sink’s Drain Stoppers
  • Carefully Remove any Visible Debris
Clear-a-Clogged-Drain-Poole's Plumbing

In the case of a double bowl sink, be sure to use a wet rag to block the second drain.

Keeping it Clean: Dishwasher and Clear Drains

We are confident with some advice from the Raleigh plumbing experts at Poole’s that you can Clear a Clogged Drain. Certainly though, “keeping it clean,” or avoiding a messy situation in doing so is something you want to keep in mind. 

Staying true to our mission to Clear a Clogged Drain in the kitchen sink, there are several areas to secure to keep things as dry as possible. These steps below are two you would want to be sure are done before going further in this process.

  • Clamp the dishwasher hose where it is attached to the drain line or disposal under the sink. This will prevent dirty water from backing up into the dishwasher.
  • In the case of a “double bowl” sink, block off one of the drains with a wet rag.
Clear-a-Clogged-Drain-Poole's

Do not plunge the drain if you have used and chemicals or drain cleaners.

Safety Reminders Before You “Plunge In”

With the hose clamped and second drain blocked, its time to “take a plunge,” literally. Note that there are some precautions to take if you have a garbage disposal in your kitchen sink. Thus, you must refer to the list below on disposals to be certain that the disposal is tended to properly as well.

In contrast, another point of note is that if any cleaners or chemicals have been poured down the drain, you do not want to take these next steps. This would seem obvious, but inhaling these type fumes can be extremely harmful. Similarly, plunging when these chemicals are present in a drain could lead to costly damage.

Clear-a-Clogged-Drain-Poole's

Using a disposal wrench or Allen wrench, rotate to open and clean debris from disposal

Garbage Disposal “Check Points” 

  • If there is a disposal, and it’s not working or is making a loud humming noise when turned on, it is likely jammed with something. 
  • If the disposal is jammed, first, turn it off. Next, either unplug the cord under the sink if it has a plug or turn off the circuit breaker in your main panel box for safety.
  • Once sure the circuit is turned off, insert the disposal wrench. If you don’t have it use an Allen wrench. Put either up into the center of the bottom of the disposal. Rotate accordingly to be sure the disposal is clear of any debris.
  • If initially when turned on the disposal made no noise, check the internal circuit breaker. This is located at the bottom of the unit. Make sure it is not popped out. If it is, press it inward to reset it.
  • Lastly, plug the disposal back in or turn the circuit breaker in the panel box back on, and turn the disposal on again. If still not working, you still can Clear a Clogged Drain. However, you will want to consult the pros at Poole’s Plumbing to regarding the disposal.

Now the Simple Solution to Clear a Clogged Drain

With all safety items checked off, now we are ready to “pop” that drain clear. By following the two simple steps below, you should have your drain running free and clear. 

  • Fill the sink with 3 to 4 inches of water.
  • Use a plunger to plunge the open drain, keeping the other side blocked. Plunge until the standing water swirls down the drain unimpeded. 

While this concludes our three-part series on how to Clear a Clogged Drain, in our next post we will still be “unclogging.” Taking it a step further, Raleigh’s most trusted plumbers, Poole’s Plumbing will move from the smaller drains to the bigger issue of clearing a sewer drain.